Recommended Content
Products of our LM Vertical Mill
Overview and application of :LM Vertical Mill 
LM Vertical Mill Operation and Maintenance
1, When the vertical roller mill working, you should observed the wind speed and input air, and they can not be too small.
2 Good control of material layer. If the material layer is too thick or too thin, it will cause the vertical mill shock.
3 The grinding materials can not have too large metal.
4 Keep the vertical mill’s main motor electric current and pressure gage steady.
| Model | LM130K | LM150K | LM170K | LM190K | LM220K | LM240K | |
| Turnplate diameter (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | |
| Capacity (t/h) | 10~30 | 13~40 | 18~57 | 23~72 | 36~114 | 41~128 | |
| Final product size | μm | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 |
| mesh | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | |
| Final product water percentage | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | |
| Max. input size (mm) | 38 | 40 | 42 | 45 | 50 | 55 | |
| Best water percentage of raw material | 4% | 4% | 4% | 4% | 4% | 4% | |
| Drying needed if water percentage is more than | 15% | 15% | 15% | 15% | 15% | 15% | |
| Input wind temperature (℃) | 350 | 350 | 350 | 350 | 350 | 350 | |
| Output wind temperature (℃) | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | |
| Main motor power (KW) | 185~220 | 250~280 | 355~400 | 450~500 | 710~800 | 800~900 | |
| Overall dimension | L mm | 3500 | 4200 | 4700 | 8500 | 10200 | 11700 |
| W mm | 3400 | 3900 | 4500 | 5600 | 6700 | 7700 | |
| H mm | 5800 | 7100 | 8300 | 8800 | 10600 | 12200 | |
| Weight (t) | 48 | 75 | 90 | 100 | 125 | 160 | |
| Model | LM130M | LM150M | LM170M | LM190M | LM220M | LM240M | |
| Turnplate diameter (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | 2400 | |
| Capacity (t/h) | 10~15 | 16~22 | 20~28 | 26~35 | 35~45 | 40~50 | |
| Coal powder fineness (R0.08) | 15% | 15% | 15% | 15% | 15% | 15% | |
| Coal powder water percentage | 1% | 1% | 1% | 1% | 1% | 1% | |
| Max. input size (mm) | 38 | 40 | 42 | 45 | 50 | 55 | |
| Input material water percentage | 15% | 15% | 15% | 15% | 15% | 15% | |
| Input wind temperature (℃) | 350 | 350 | 350 | 350 | 350 | 350 | |
| Output wind temperature (℃) | 75~95 | 75~95 | 75~95 | 75~95 | 75~95 | 75~95 | |
| Raw coal Hardgrove grindability index (HGI) | >55 | >55 | >55 | >55 | >55 | >55 | |
| Main motor power (KW) | 185 | 250 | 315 | 400 | 500 | 560 | |
| Overall dimension | L mm | 3500 | 4200 | 4700 | 8500 | 10200 | 11700 |
| W mm | 3400 | 3900 | 4500 | 5600 | 6700 | 7700 | |
| H mm | 5800 | 7100 | 8300 | 8800 | 10600 | 12200 | |
| Weight (t) | 46 | 75 | 94 | 100 | 122 | 157 | |
